Licensed & Insured. Crawl space Encapsulation and Mold Remediation

Should I Vent or Encapsulate My Crawl Space in Nashville?

Should I Vent or Encapsulate My Crawl Space in Nashville

Should I vent or encapsulate my crawl space in Nashville? This question has become increasingly pertinent for homeowners seeking effective ways to address crawl space issues and optimize their living environments. 

With Nashville’s unique climate and soil conditions, the decision between venting and encapsulating crawl spaces demands careful consideration. In this blog post, we will delve into the factors surrounding this crucial dilemma, exploring the pros and cons of both approaches. 

The answer to the question, “should I vent or encapsulate my crawl space in Nashville?” lies not only in the specific challenges posed by crawl space problems but also in the insights provided by Nashville’s crawlspace experts. 

Through this exploration, we aim to offer homeowners a comprehensive guide to making an informed choice that suits their needs and contributes to the overall well-being of their homes.

Table Of Contents:

Understanding Crawl Spaces

Definition and Purpose of Crawl Spaces

A crawl space is an unfinished space under a home that is typically below ground level. It is typically accessed through a small door in the floor of the home. Crawl spaces are important for providing access to utilities and for storing belongings. They can also help to insulate the home and regulate the temperature.

Common Issues in Crawl Spaces

The most common issues in crawl spaces are moisture, mold, pests, and rodents. Moisture can cause wood rot, mold growth, and structural damage. Mold can cause health problems, such as allergies and respiratory infections. Pests and rodents can damage property and spread diseases.

Factors Influencing Decision

The climate, soil, and location of your home can all influence the decision of whether to vent or encapsulate your crawl space. In Nashville, which has a humid climate, encapsulation is typically the best option for preventing moisture problems. However, if you have clay soil, you may need to vent your crawl space to prevent it from becoming too dry. The location of your home can also be a factor. If your home is in a floodplain, you may need to vent your crawl space to prevent it from flooding.

Here are some additional factors to consider when making the decision:

  • The age of your home: Older homes are more likely to have moisture problems, so encapsulation may be a good option.
  • The condition of your crawl space: If your crawl space is in good condition, you may be able to get away with venting it. However, if there is any evidence of moisture damage, encapsulation is a better option.
  • Your budget: Encapsulation is more expensive than venting, so you need to decide if the cost is worth it.

If you are unsure of whether to vent or encapsulate your crawl space, it is a good idea to consult with a professional.

Here are some additional tips for maintaining your crawl space:

  • Inspect your crawl space regularly for signs of moisture, mold, pests, or rodents.
  • Seal any cracks or holes in the foundation or walls of the crawl space.
  • Install a sump pump to remove any water that does accumulate in the crawl space.
  • Ventilate your crawl space if you choose not to encapsulate it.
  • Have your crawl space professionally cleaned and treated for mold every few years.

By following these tips, you can help to keep your crawl space dry and free of problems.

The Science of Crawl Space Encapsulation

Crawl space encapsulation is the process of sealing off the crawl space from the outside environment. This is done by installing a vapor barrier on the walls and floor of the crawl space and sealing any cracks or holes in the foundation. The vapor barrier prevents moisture from entering the crawl space, which can help to prevent mold, mildew, and other moisture-related problems.

The science behind crawl space encapsulation is based on the principle of vapor diffusion. Vapor diffusion is the process of water vapor moving from areas of high humidity to areas of low humidity. When the crawl space is sealed off, the moisture in the air cannot escape, and it eventually condenses on the walls and floor. This condensation can lead to mold, mildew, and other moisture-related problems.

Crawl space encapsulation can help to prevent these problems by creating a barrier that prevents moisture from entering the crawl space. The vapor barrier also helps to keep the crawl space warm in the winter and cool in the summer, which can help to improve the energy efficiency of the home.

In addition to preventing moisture problems, crawl space encapsulation can also help to:

  • Improve air quality in the home.
  • Reduce the risk of pests and rodents.
  • Mitigate radon gas.
  • Increase the value of the home.

Crawl space encapsulation is a relatively simple process, but it is important to do it correctly to be effective. The vapor barrier should be installed properly, and any cracks or holes in the foundation should be sealed. It is also important to ventilate the crawl space properly to prevent mold and mildew growth.

If you are considering crawl space encapsulation, it is a good idea to consult with a professional. A professional can help you assess your needs and recommend the best course of action.

Here are some additional tips for crawl space encapsulation:

  • Use a high-quality vapor barrier that is designed for crawl spaces.
  • Install the vapor barrier properly, overlapping the seams and sealing any gaps.
  • Seal any cracks or holes in the foundation.
  • Ventilate the crawl space properly.
  • Inspect the crawl space regularly for signs of moisture problems.

By following these tips, you can help to ensure that your crawl space is properly encapsulated and protected from moisture, pests, and rodents.

 

Key Takeaway: 

Crawl spaces face moisture and pest challenges. Opt for venting or encapsulation based on Nashville’s factors, with professional advice. Regular checks, sealing, and ventilation are key. Encapsulation using vapor barriers prevents moisture issues, improves air quality, and boosts energy efficiency. Pro installation and upkeep are vital, guided by professionals for effectiveness and problem prevention.

Venting Crawl Spaces

Explanation of Crawl Space Venting

Crawl space venting is the process of allowing fresh air to circulate through the crawl space. This is done by installing vents in the walls or floor of the crawl space. The vents allow the moisture in the crawl space to escape and prevent mold and mildew growth.

Venting Crawlspace Pros and Cons

Pros of Venting

Moisture Control

Venting can help to control moisture levels in the crawl space by allowing the air to circulate. This can help to prevent mold and mildew growth, which can cause health problems and damage to the home.

Air Circulation

Venting can also help to improve air circulation in the crawl space. This can help to reduce the risk of pests and rodents, and it can also help to improve the overall air quality in the home.

Radon Mitigation

Venting can also help to mitigate radon gas, which is a radioactive gas that can cause cancer. Radon gas can seep into homes from the ground, and venting can help to remove it from the crawl space.

Cons of Venting

Humidity Issues

If the vents are not properly located or sized, they can actually increase humidity levels in the crawl space. This can lead to mold and mildew growth.

Potential Energy Loss

Venting can also lead to potential energy loss. This is because the warm air from the home can escape through the vents, which can increase the heating and cooling costs.

Pest Infestation

Vents can also provide an entry point for pests and rodents into the crawl space. This can damage the home and spread diseases.

Overall, venting is a good option for controlling moisture levels in a crawl space. However, it is important to do it properly to avoid potential problems.

Here are some additional tips for venting your crawl space:

  • Install vents in the highest and lowest parts of the crawl space. This will help to create a cross-breeze and improve air circulation.
  • Use vents that are the correct size for your crawl space. Too small of vents will not be effective, and too large of vents can increase humidity levels.
  • Install insect screens on the vents to prevent pests from entering the crawl space.
  • Inspect the vents regularly for damage and make repairs as needed.

By following these tips, you can help to ensure that your crawl space is properly vented and protected from moisture, pests, and rodents.

Key Takeaway: 

Venting crawl spaces manages moisture, enhance air quality, and tackles radon. Poor venting may raise the humidity, spike energy expenses, and attract pests. Correct vent placement, sizing, and upkeep are vital. Well-positioned vents with screens ensure efficiency. Routine checks maintain a ventilated crawl space, guarding against moisture, pests, and rodents.

Encapsulating Crawl Spaces

Explanation of Crawl Space Encapsulation

Crawl space encapsulation is the process of sealing off the crawl space from the outside environment. This is done by installing a vapor barrier on the walls and floor of the crawl space and sealing any cracks or holes in the foundation. The vapor barrier prevents moisture from entering the crawl space, which can help to prevent mold, mildew, and other moisture-related problems.

Pros of Encapsulation

Moisture and Humidity Control

Crawl space encapsulation can help to control moisture and humidity levels in the crawl space. This can help to prevent mold and mildew growth, which can cause health problems and damage to the home.

Improved Energy Efficiency

Crawl space encapsulation can help to improve the energy efficiency of the home. This is because the vapor barrier helps to keep the crawl space warm in the winter and cool in the summer. This can lead to lower heating and cooling costs.

Pest Prevention

Crawl space encapsulation can help to prevent pests and rodents from entering the crawl space. This can protect the home from damage and the spread of diseases.

Cons of Encapsulation

Higher Initial Cost

Crawl space encapsulation is a more expensive option than venting. However, long-term savings on energy costs can offset the initial cost.

Installation Challenges

Crawl space encapsulation can be a challenging project, especially if the crawl space is small or difficult to access. It is important to hire a qualified professional to install the vapor barrier and seal any cracks or holes in the foundation.

Limited Ventilation

Crawl space encapsulation can limit ventilation in the crawl space. This can be a problem if the crawl space is not properly sealed, as it can lead to moisture buildup and mold growth.

Overall, crawl space encapsulation is a good option for homes that are prone to moisture problems. However, it is important to weigh the pros and cons before making a decision.

Here are some additional tips for crawl space encapsulation:

  • Use a high-quality vapor barrier that is designed for crawl spaces.
  • Install the vapor barrier properly, overlapping the seams and sealing any gaps.
  • Seal any cracks or holes in the foundation.
  • Ventilate the crawl space properly.
  • Inspect the crawl space regularly for signs of moisture problems.

By following these tips, you can help to ensure that your crawl space is properly encapsulated and protected from moisture, pests, and rodents. 

Factors to Consider in Nashville

Nashville’s Climate and Weather Patterns

Nashville has a humid subtropical climate, which means that it has hot, humid summers and mild winters. The average annual temperature is 60 degrees Fahrenheit. The wettest months are March, April, and May, and the driest months are October and November.

The high humidity levels in Nashville can contribute to moisture problems in crawl spaces. This is why it is important to consider crawl space encapsulation if you live in Nashville.

Soil Composition in the Region

The soil composition in the Nashville area is mostly clay. Clay soils are known for holding moisture, which can also contribute to moisture problems in crawl spaces. This is why it is important to have a vapor barrier installed in the crawl space if you have clay soil.

Local Building Codes and Regulations

There are no specific building codes or regulations in Nashville that require crawl space encapsulation. However, some homeowners associations may have requirements for crawl space encapsulation. It is always a good idea to check with your local building department or homeowners association to see if there are any specific requirements.

In addition to the factors mentioned above, you should also consider the following factors when deciding whether to vent or encapsulate your crawl space in Nashville:

  • The age of your home: Older homes are more likely to have moisture problems, so encapsulation may be a good option.
  • The condition of your crawl space: If your crawl space is in good condition, you may be able to get away with venting it. However, if there is any evidence of moisture damage, encapsulation is a better option.
  • Your budget: Encapsulation is more expensive than venting, so you need to decide if the cost is worth it.

If you are unsure of whether to vent or encapsulate your crawl space in Nashville, it is a good idea to consult with a professional. A professional can help you assess your needs and recommend the best course of action.

 

Key Takeaway: 

Nashville’s humid climate and clay soil pose moisture risks in crawl spaces, making encapsulation essential. While no local codes mandate it, considering your home’s age, crawl space condition, and budget is crucial. Consult professionals for tailored solutions to address Nashville’s unique challenges.

Making an Informed Decision

Assessing Your Crawl Space’s Current Condition

The first step in making an informed decision about whether to vent or encapsulate your crawl space is to assess its current condition. This includes inspecting the crawl space for signs of moisture, mold, pests, and rodents. You should also check the foundation for cracks or holes.

If you find any signs of moisture problems, encapsulation is the best option. Encapsulation will help to prevent moisture from entering the crawl space and causing further damage.

If the crawl space is in good condition, you may be able to get away with venting it. However, if you are concerned about moisture problems in the future, encapsulation is a good option to consider.

 

Making an informed Decision on Crawlspace encapsulation

Identifying Your Goals

Once you have assessed the current condition of your crawl space, you need to identify your goals. What do you want to achieve by venting or encapsulating your crawl space?

If your primary goal is to control moisture, then encapsulation is the best option. Encapsulation will create a barrier that prevents moisture from entering the crawl space. This can help to prevent mold growth, mildew, and other moisture-related problems.

If your primary goal is to improve energy efficiency, then venting is the better option. Venting allows fresh air to circulate through the crawl space, which can help to regulate the temperature and humidity. This can lead to lower heating and cooling costs.

You may also have other goals, such as preventing pests or rodents, improving air quality, or increasing the value of your home. Encapsulation can help to achieve all of these goals.

Consulting Professionals for Personalized Advice

The best way to get personalized advice about venting or encapsulating your crawl space is to consult with a professional. A professional can assess your needs and recommend the best course of action.

When consulting with a professional, be sure to ask about their experience, qualifications, and warranty. You should also get estimates from multiple professionals before making a decision.

Budget Considerations

The cost of venting or encapsulating your crawl space will vary depending on the size and condition of your crawl space. Encapsulation is typically more expensive than venting. However, long-term savings on energy costs can offset the initial cost.

You need to factor in the cost of the project when making your decision. You should also consider the cost of maintenance and repairs.

Making an informed decision about whether to vent or encapsulate your crawl space is important. By considering all of the factors involved, you can choose the best option for your home.

 

Key Takeaway: 

Assess crawl space conditions for moisture, mold, and pests. Encapsulation suits issues, venting for good condition. Define goals – encapsulation controls moisture, and venting improves energy efficiency. Consult pros for personalized advice, and consider the budget. Informed choices ensure optimal crawl space solutions.

Revamping Your Crawlspace Insulation for Enhanced Energy Efficiency

Significance of Energy Efficiency

Energy efficiency is the ability to use less energy to achieve the same results. This can save money on energy bills and reduce greenhouse gas emissions.

Importance of Crawlspace Insulation in Energy Conservation

Crawlspaces are often overlooked when it comes to energy conservation. However, crawlspaces can account for up to 20% of a home’s energy loss. This is because crawlspaces are typically unheated and uncooled, and they can be a source of air leaks.

Assessing Current Insulation

The first step in revamping your crawlspace insulation is to assess the current insulation. This includes checking the thickness and type of insulation, as well as any gaps or tears.

Signs of Inadequate Insulation

There are a few signs that your crawlspace insulation may be inadequate. These include:

  • High energy bills: High energy bills can be a sign of inadequate crawlspace insulation. This is because heat can escape from the crawl space, which can increase your heating and cooling costs.
  • Condensation on the walls or floor of the crawl space: Condensation on the walls or floor of the crawl space can also be a sign of inadequate crawlspace insulation. This is because moisture can condense on the cold surfaces of the crawl space, which can lead to mold and mildew growth.
  • Mold or mildew growth: Mold or mildew growth can occur in crawlspaces that are not properly ventilated or insulated. Mold and mildew can cause health problems, such as allergies and respiratory infections.
  • Pests or rodents: Pests or rodents can also be a problem in crawlspaces that are not properly sealed. Pests and rodents can damage the insulation and cause other problems.

If you are experiencing any of these problems, it is important to have your crawlspace inspected by a professional. A professional can assess the condition of your crawlspace and recommend the best course of action to improve the insulation and prevent future problems.

Choosing the Right Insulation Material

There are a few different types of insulation that can be used in crawlspaces. The best type of insulation for your home will depend on the climate, the size of the crawl space, and your budget.

Some of the most common types of crawlspace insulation include:

  • Fiberglass batts: Fiberglass batts are made from small glass fibers that are held together with a binder. They are a popular choice for crawlspace insulation because they are relatively inexpensive and easy to install. However, they can be dusty and irritating to work with.
  • Foam insulation: Foam insulation is made from a variety of materials, including polyurethane, polyisocyanurate, and extruded polystyrene. It is a more expensive option than fiberglass batts, but it is also more effective at insulating. Foam insulation can be sprayed or blown in, which makes it a good option for tight spaces.
  • Cellulose insulation: Cellulose insulation is made from recycled paper that is treated with fire retardant. It is a good option for crawlspaces because it is non-toxic and environmentally friendly. Cellulose insulation can be blown in or installed in batts.
  • Rockwool insulation: Rockwool insulation is made from molten rock that is spun into fibers. It is a good option for crawlspaces because it is fire-resistant and moisture-resistant. Rockwool insulation can be installed in batts or rolls.

The best type of insulation for your crawlspace will depend on the climate, the size of the crawl space, and your budget. In general, fiberglass batts are a good option for most crawlspaces. However, if you live in a cold climate, you may want to consider using foam insulation.

Preparing for Insulation Revamp

Before you start revamping your crawlspace insulation, there are a few things you need to do to prepare. This includes:

  • Cleaning the crawl space: Cleaning the crawl space is important to remove any debris or moisture that could cause problems. This includes dirt, leaves, cobwebs, and any other materials that could harbor mold or mildew.
  • Sealing any cracks or gaps: Sealing any cracks or gaps is important to prevent air leaks and moisture from entering the crawl space. This can be done with caulk, sealant, or weatherstripping.
  • Removing any furniture or belongings from the crawl space: Removing any furniture or belongings from the crawl space is important to make it easier to work in the crawl space and ensure that the insulation is installed properly. It also helps to prevent pests and rodents from nesting in the belongings.

Insulation Removal and Replacement

Once you have prepared the crawl space, you can start removing the old insulation. Be sure to wear gloves and a mask to protect yourself from dust.

Once the old insulation is removed, you can install the new insulation. Be sure to follow the manufacturer’s instructions carefully.

Sealing and Air Barrier Installation

In addition to installing new insulation, it is also important to seal the crawl space and install an air barrier. This will help to prevent air leaks and improve the energy efficiency of your home.

Enhancing Energy Efficiency

Revamping your crawlspace insulation can help to enhance the energy efficiency of your home. This can lead to lower energy bills and reduced greenhouse gas emissions.

Professional Consultation

If you are not comfortable revamping your crawlspace insulation yourself, you can hire a professional. A professional can assess your needs and recommend the best course of action.

DIY vs. Professional Installation

Whether you should DIY or hire a professional to revamp your crawlspace insulation depends on your comfort level and budget. DIY can save you money, but it is important to do your research and follow the manufacturer’s instructions carefully.

Maintaining and Monitoring Insulation

Once you have revamped your crawlspace insulation, it is important to maintain and monitor it. This includes checking the insulation regularly for signs of damage or wear.

You should also have your crawl space inspected by a professional every few years to ensure that the insulation is still effective.

Key Takeaway: 

Crawlspaces impact up to 20% of energy loss due to air leaks. Assess current insulation for signs of inefficiency like high bills, condensation, or pests. Choose insulation based on climate and budget. Proper prep, removal, and replacement are crucial. Seal the space and install an air barrier for improved efficiency. Revamped insulation lowers costs and emissions. Consider professionals if unsure, and maintain and monitor regularly for lasting effectiveness.

Ensuring Optimal Indoor Air Quality After Encapsulation

Importance of Indoor Air Quality

Indoor air quality (IAQ) is the quality of the air inside a building, home, or other enclosed space. It is important to have good IAQ because it can affect your health, comfort, and productivity.

Impact of Encapsulation on Air Quality

Crawl space encapsulation is the process of sealing off the crawl space from the outside environment. This can help to improve IAQ by preventing moisture and pollutants from entering the crawl space.

However, encapsulation can also have a negative impact on IAQ if it is not done properly. If the crawl space is not properly ventilated, it can become stagnant and humid, which can lead to mold and mildew growth.

Ventilation Considerations After Encapsulation

After encapsulation, it is important to provide adequate ventilation to the crawl space. This can be done by installing vents in the walls or floor of the crawl space.

The amount of ventilation needed will depend on the size of the crawl space and the climate. In general, you should provide enough ventilation to allow for at least one complete air exchange every hour.

Use of Dehumidifiers and Air Purifiers

Dehumidifiers and air purifiers can also be used to improve IAQ after encapsulation. Dehumidifiers remove moisture from the air, which can help to prevent mold and mildew growth. Air purifiers remove pollutants from the air, such as dust, pollen, and pet dander.

Regular Air Quality Monitoring

It is important to monitor the air quality in your crawl space regularly after encapsulation. This can be done with a home air quality monitor.

If you notice any problems with the air quality, such as mold or mildew growth, you should take steps to correct the problem.

Here are some additional tips for ensuring optimal IAQ after encapsulation:

  • Choose a reputable encapsulation contractor.
  • Make sure the encapsulation is done properly.
  • Provide adequate ventilation to the crawl space.
  • Use a dehumidifier and air purifier if needed.
  • Monitor the air quality regularly.

By following these tips, you can help to ensure that your crawl space has good IAQ and that you and your family can enjoy a healthy and comfortable home. 

The Answer: Should I Vent or Encapsulate My Crawl Space in Nashville?

Should I Vent or Encapsulate my crawlspace in Nashville

Here are some factors to consider when making your decision:

  • Climate: Nashville has a humid subtropical climate, which means that it has hot, humid summers and mild winters. This makes it more likely for moisture to build up in crawl spaces, which can lead to mold and mildew growth. Encapsulation can help to prevent moisture buildup and improve the air quality in your home.
  • Condition of your crawl space: If your crawl space is in good condition and there are no signs of moisture problems, then venting may be a good option for you. However, if your crawl space is damp or has mold or mildew growth, then encapsulation is a better option.
  • Budget: Encapsulation is a more expensive option than venting. However, it can save you money in the long run by preventing moisture problems and improving the energy efficiency of your home.

If you are unsure of whether to vent or encapsulate your crawl space, it is a good idea to consult with a professional. A professional can assess the condition of your crawl space and recommend the best option for you.

Here is a table summarizing the pros and cons of venting and encapsulation:

VentingEncapsulation
More affordableMore expensive
Can help to prevent moisture buildupPrevents moisture buildup
Can improve air qualityImproves air quality
Not as effective at preventing moisture buildup as encapsulationCan be more difficult to inspect and maintain

Ultimately, the decision of whether to vent or encapsulate your crawl space is up to you. Weigh the factors that are important to you and choose the option that you think is best for your home.

FAQs in Relation to Should I Vent or Encapsulate My Crawl Space in Nashville?

What are the potential issues associated with vented crawl spaces moving forward?

Vented crawl spaces moving forward can lead to various crawl space problems, such as excess humidity, poor indoor air quality, and energy inefficiency. Nashville’s crawlspace experts recommend considering encapsulation as an alternative solution.

How do vent fans provide ample opportunity for crawl space improvement?

Vent fans aim to address humid crawl spaces by increasing air circulation, but they can inadvertently introduce harmful outdoor air into the space. Leading Nashville crawlspace companies advise that other methods like crawl space encapsulation and crawlspace waterproofing systems may offer better solutions.

Can vent fans truly solve humidity issues and poor indoor air quality?

While vent fans can help with humidity control, they often fall short of addressing poor indoor air quality. Experienced crawlspace pros in Nashville emphasize that encapsulation not only controls moisture but also aids in removing air contaminants, leading to better indoor air quality.

Is outdoor air typically harmful, and how can it affect my crawl space?

Outdoor air typically contains pollutants and moisture that can contribute to poor indoor air quality and crawl space problems. Nashville’s crawlspace experts caution that relying solely on vent fans may introduce harmful outdoor air, suggesting that encapsulation can be a more effective solution.

What are the key truths about vent fans that homeowners should know?

Vent fans aim to mitigate humidity in crawl spaces, but they might not be as effective as advertised. Crawlspace Makeovers, a leading Nashville crawlspace company, points out that vent fans can disrupt temperature regulation, potentially leading to energy loss and poor performance in controlling crawl space moisture.

What are the implications of a vented crawl space moving forward in terms of crawl space insulation and open vents in humid air?

Choosing a vented crawl space may lead to challenges. Open vents allow humid air to enter, potentially causing moisture-related issues and undermining crawl space insulation. This is especially relevant in humid climates like Nashville. Understanding the vent fan truths is essential before deciding on your crawl space solution.

Crawl Space Help

 

Deciding Whether to Vent or Encapsulate Your Crawl Space in Nashville Significantly Impacts Energy Efficiency and Indoor Air Quality, Shaping a Healthier Home Environment

In conclusion, the decision of whether to vent or encapsulate your crawl space in Nashville is a significant one that requires careful evaluation. Your choice will impact not only the energy efficiency and indoor air quality of your home but also its long-term structural integrity. 

Throughout this discussion, we’ve explored the advantages and disadvantages of both approaches, taking into account the unique challenges posed by crawl space problems in Nashville’s climate and soil composition.

As you weigh your options, it’s crucial to remember that seeking guidance from experienced crawlspace professionals can make a substantial difference. They possess the expertise to assess your specific situation, recommend tailored solutions, and execute the necessary measures to ensure the optimal condition of your crawl space. 

Should I vent or encapsulate my crawl space in Nashville? With their assistance, you can navigate the complexities of crawl space maintenance, improve energy efficiency, and enhance indoor air quality.

In light of this, we encourage you to take the next step by reaching out to Crawlspace Makeover – the leading crawl space encapsulation company in Nashville, Tennesee. Schedule a consultation to discuss your concerns, receive personalized insights, and embark on a path toward a healthier, more efficient home. 

Making the right choice for your crawl space not only offers immediate benefits but also contributes to the overall well-being and longevity of your cherished living space.

Picture of Greg Lewis

Greg Lewis

Greg Lewis is the founder and CEO of Tier Restoration, a company dedicated to restoring the indoor environment of homes and businesses experiencing water damage, smoke damage, or mold contamination.

Greg has spent most of his life working in this industry in Nashville, Tennessee, in the 1970s, working in his father’s commercial cleaning business, in the 1980s and 1990s as a partner with his father in the Sears Carpet and Duct Cleaning franchise, then on his own since 2000.

Greg played his trumpet at Overton High School and the University of Tennessee, Chattanooga, and you can still find him playing throughout the Greater Nashville, Tennessee area.

615-371-5355